Single Electrolyzer Kit
The Single Electrolyzer Kit is a PEM Electrolyzer with water tanks, hydrogen, and oxygen storage tanks. The Electrolyzer 5 produces and stores hydrogen and oxygen simply by adding de-ionized water and an electric load. The Electrolyzer and included tanks each have a magnetic base affixed firmly to their bottom sides so they can be placed on the black metal base plate.
The electrolyzer provided in this set is maintenance-free. However, always remember to use fresh, distilled water each time and to drain the water from the storage tanks after use.
• Permissible Voltage: up to 2 V DC
• Permissible Current: up to 1.5 A
• Hydrogen Production: up to 10 mL/min
• Oxygen Production: up to 5 mL/min
• Electrode Area: 2.9 cm²
• Requires Commercial distilled (deionized) water with a conductivity of < 2 ?S/cm
• Dimensions (H x W x D): 2.0″ x 2.0″ x 1.6″ (51 x 51 x 41 mm)
• Weight: ~2oz (58 g)
• This product is a redesign of the Electrolyzer 5
About PEM Electrolyzers
The growing significance of PEM electrolyzers mirrors the development of fuel cells. Electrolyzers generate the hydrogen required by fuel cells from water in an environmentally conscious manner. The electrical energy required for this purpose can be gained from renewable sources such as solar cells, wind farms or hydroelectric plants.
Water reacts in the electrolyzer under the influence of electrical energy according to the following formula: 2H 2 O = 2H 2 + O 2 . This process takes place in the MEA (membrane electrode assembly). The MEA consists of the cathode, the anode, and a special polymer membrane (PEM) which is permeable to protons but which presents a barrier to electrons. Your h-tec electrolyzer functions on the PEM principle. The energy stored in chemical form in the gases can be converted back to electrical energy in a fuel cell as and when required.